* Each Pad is 4m Long x 1m wide x 0.2m high.
* 30 tonne capacity per set.
* Ability to weigh dual or tri – axles.
* Additional sections can be joined to create a portable weighbridge.
* Entry and exit ramps included.
* Optional Driver Self Service Terminal with built in CoR software, a remote display with Red / Green traffic light and printer for complete data logging of axle weights.

In- Motion Axle Weighing system is fast accurate and economical way to monitor your commodities that are coming in or leaving your facility.The In Motion Axle Scale is pre-configured for easy installation. The load cells are factory calibrated and the indicator is pre-programmed. All wiring uses watertight M12 connectors. Just install, add power, zero the scale and start weighing. On average better than +-0.05% repeatability can be expected. Company testing as well as extensive field trials have shown that with extended flat and level concrete approaches 0.02% or better accuracy can be achieved. (Individual results may vary)

• Reduced high, only 50mm.
• Extremely sturdy structure, made in a special alloy of high resistance.
• IP68 protection degree of the load cells and the connectors, for using in presence of water, mud, or dust.
• Cable storage, standard fitted in all the models.
• 10 m extension cable for the connection to the indicator.
• Integrated wheels to facilitate the transport.
• Nonslip rubber applied under the platform, for good grip on all types of surfaces.
• Patented technology: patent number 1.342.302.
Available also in:
• CE-M approved version.
• R134 approved for the dynamic weighing.

• Reduced high, only 50mm.
• Structure made in a special alloy, extremely sturdy and strong.
• IP68 stainless steel load cells.
• IP68 protection degree.
• Built-in weight indicator into the platform and protected thanks to an IP68 hermetic box.
• Built-in radio module for weight transmission to a remote indicator or external device.
• Integrated wheels to facilitate the transport.
• Internal rechargeable battery with a long life.
• Nonslip rubber applied under the platform, for good grip on all types of surfaces.
• Patented technology: patent
number 1.342.302.
Available also in:
• CE-M approved version.

* Customisable in-ground group axle weighbridge.
* 30-40 tonne capacity depending on size of the weighbridge.
* Ability to weigh dual, tri or quad axles.
* Pit frame and loadcell foundation plates supplied with the weighbridge for simplified civil foundations.
* Optional Driver Self Terminal with built in CoR Software, a remote display with Red/Green traffic light and printer for complete data logging of axle weights.